SIG Sauer 229 Replacement Recoil Buffer - Buffer Technologies


SIG Sauer 229 Replacement Recoil Buffer - Buffer Technologies

Processing...
Item #: BTSIG9

$22.95

In Stock for Immediate Shipping
Qty

Manufacturer MPN:
Buffer Tech SIG9

UPC: 855727000655
Weight: 0.50 pounds


Product Description

Buffer Technologies recoil buffers are used to reduce parts wear and recoil of your firearms. These polymer recoil buffers prevent the metal-on-metal impact of a bolt or slide from impacting the frame while firing. They are made from Estane 58130, which is not affected by common firearm cleaners, making them last for hundreds of rounds.

Eliminate the metal-to-metal impact of the slide as it hits the frame of your SIG SAUER P229 with Buffer Technologies’ new recoil buffer. Made with a new stainless steel guide rod with a high density, shock-absorbing polyurethane buffer, the recoil buffer provides less recoil and more muzzle control for prolonged longevity of your duty issue P229.  This Recoil Buffer fits P229 with a guide rod length of 2 7/8 inches.


Installation of Sig P229 Recoil Buffer
1. Make sure pistol is unloaded.
2. Remove the slide from the frame, by disassembling per owners manual.
3. Remove guide rod and recoil spring from slide assembly.
4. Insert the supplied guide rod bushing into the slide.  The flat side of the bushing will be towards the rear.
5. Replace the factory guide rod with the guide rod and recoil buffer.
6. Reassemble using factory recoil spring.

Related Categories That You May Also Be Interested In:
 Buffer Technologies |  Recoil Buffers |