The Magpul L-Plate is a floorplate replacement for current issue USGI 30 round magazines that incorporates a rubberized pad.  Bumper pad is made of durable Santoprene overmolded onto a stainless steel plate.  The rubberized bumper shields the magazine from impact. The low profile overmolded L-Plate aids in magazine control.Made in U.S.A.

Pack of 3

Platform: AR15, M4, M16

Fits: 30-round USGI NATO aluminum magazines

Color: Black

                USGI L-Plate Installation

CAUTION: Spring Under Pressure

Use care when performing installation as the magazine spring may eject and cause injury.

Step 1: Remove Existing Floor Plate

Using a 5.56x45 Dummy Round or small screwdriver, gently pry the floor plate up to disengage the catch while sliding the floor plate towards the rear of the magazine.

Step 2: Install Lock Plate

Install the included lock plate by setting it on top of the magazine spring with the bullet symbol facing the front of the magazine. Push the lock plate down, hold, and continue to the next step.

Step 3: Attach L-Plate

While depressing the lock plate, slide the L-plate’s exposed metal tabs underneath the magazine body’s tabs. Once slid fully forward into place you should hear a click, indicating the lock plate is seated correctly.

Step 4:  Verify Installation

Make sure the lock plate is correctly seated. Perform final inspection including function check per US Army TM 05588C-10/1A (41-42) to verify correct installation. 

NOTE: For best results it is not recommended to load a 30-round USGI magazine with more than 28 5.56x45 cartridges (.223 Remington) to ensure correct seating.

Attention: Check magazine function via live fire test prior to tactical deployment.