Browning Hi-Power Replacement Recoil Buffer - Buffer Technologies


Item #: BTR114


In Stock for Immediate Shipping

Manufacturer MPN:
Buffer Technologies BH1

UPC: 855727000600
Weight: 0.50 pounds

Product Description

Buffer Technologies recoil buffers are used to reduce parts wear and recoil of your firearms. These polymer recoil buffers prevent the metal-on-metal impact of a bolt or slide from impacting the frame while firing. They are made from Estane 58130, which is not affected by common firearm cleaners, making them last for hundreds of rounds.

The Browning Hi-Power Recoil Buffer easily fits onto the recoil spring guide rod. Installation takes less than a minute and can be done without any special tools. 

The Browning Hi-Power is an undeniable classic. Taking good care of its action is essential if you want to ensure that your piece of the Browning legacy endures. However, every time you fire off a round the slide slams backward making contact with another piece of steel. Gradually this can cause the action to become loose! Fortunately, a Recoil Buffer can cushion this trauma and lengthen the service life of your favorite pistol.

Those who install Recoil Buffers into their automatic firearms will not only be protecting their investments by prolonging their service life, but they will also find that the recoil is reduced and muzzle stability is increased.

Installation instructions for Browning HP recoil buffer
1. Make sure pistol is unloaded.
2. Remove slide from frame.
3. Rest slide, with sights on a flat surface, remove recoil spring and guide.
4. Place the recoil buffer against the inside of the dust cover/slide buffer will mate with contours of the slide.
5. Reinstall recoil spring and guide. Spring and guide will fit through buffer.
6. Reassemble then operate slide to set buffer in place.

Related Categories That You May Also Be Interested In:
 Buffer Technologies |  Recoil Buffers |