PPSH41 SEMI SR41 Replacement Recoil Buffer - Buffer Technologies


Item #: BTR410


In Stock for Immediate Shipping

Manufacturer MPN:
Buffer Technologies PPSH41

UPC: 855727000679
Weight: 0.50 pounds

Product Description

The Buffer Technologies PPSH-41/Semi SR41 recoil buffer will fit on all original models as well as the new semi-auto version now being produced.  The recoil buffer simply replaces the existing buffer, but the difference is that our buffer is made of a polyurethane material which can take thousands of rounds without breaking down or coming apart like the original.  This 21st Century material replaces 1940's technology, which was all that was available when the gun was designed.

Since the original buffer was very hard the impact from the bolt was transferred into the receiver, but not with the replacement buffer! You will experience reduced felt recoil and better muzzle control, all this while lengthening the service life of the weapon. The recoil buffer is simple to install and requires no modification to the firearm.

Installation instructions for PPSh41/Semi SR41 recoil buffer
1. Make sure weapon is unloaded.
2. Field strip weapon and remove existing buffer if present.
3. Place recoil buffer over recoil spring/guide in place of original buffer.  If not present, curved side of buffer goes to the rear.
4. Reassemble to operate bolt.

Related Categories That You May Also Be Interested In:
 Buffer Technologies |  Recoil Buffers |