Remington 870 12 Gauge Shotgun Forend Tactical Grip - TacStar
Weight: 0.60 pounds
Forend Grip for Remington 870 12 Gauge Pump Shotguns – TacStar
Fits: Remington 870 Pump Shotguns
High-impact ABS Polymer
Includes Action Bars
Distributes recoil evenly
12 Gauge Only
The TacStar Forend Shotgun Grips were designed with the proper width, rearward angle, and back swell to distribute recoil energy evenly into both hands resulting in greater speed, accuracy, and control when shooting.
Injection-molded from a high-impact ABS polymer, Tactical Shotgun Grip Sets include all the necessary hardware for quick and easy installation and require no alterations to the shotgun.
TacStar offers rugged, reliable performance and value. The legendary SideSaddles and Magazine Extensions, a Weapons Light System, Shotgun and AR15 Grips, the handy TacSling, and the Adjustable Match Rifle Stock, all provide high quality and tactical performance you can count on.
Instructions for Remington 870 Forend Tactical Grip
1. Remove the barrel by unscrewing the magazine end cap or extension and pulling the barrel free from the receiver.
CAUTION-The magazine spring may be released when the end cap or extension is removed.
2. With slight forward pressure being applied to the forend, depress the primary shell-stop. (You will feel the forend and slide assembly move forward slightly). Depress the secondary shell-stop which allows the bolt assembly to be removed from the shotgun.
3. Set the bolt assembly aside. Using the supplied "T" wrench, unscrew the forend nut and remove the forend.
CAUTION-Be sure not to bend the forend's side rails.
4. Replace the forend with the forend Tactical Grip and securely tighten the nut in place. You are now ready to reassemble your shotgun by reversing the previous instructions.
Related Categories That You May Also Be Interested In:
Replacement Grips | Shotgun Grips and Forends | Tacstar Pachmayr Lyman |