Persian Mauser Scout Mount - Includes Rings - S&K Scope Mounts


Persian+Mauser+Scout+Mount+-+Includes+Rings+-+S%26K+Scope+Mounts

Processing...
Item #: SKPER65

$81.95

In Stock for Immediate Shipping
Qty

Manufacturer MPN:
S&K Mounts PER65

UPC: none
Weight: 2.00 pounds


Product Description

No drilling, tapping or major alteration. Guaranteed to hold zero. Can be removed and reinstalled easily. Includes 1" fully machined, horizontally split scope rings and is windage adjustable. Requires a long eye relief scope. Made in the USA of top grade military allan aircraft aluminum.

Installation instructions for the PER 65

Remove the rear sight from the rifle. Keep the S&K mount centered over the rear sight area & at the same time slide the bottom foot of the mount into the undercut at the rear while pushing down on the front. You may need to tap the mount lightly back into the undercut. The two tapped side holes in the mount need to line up with the holes in the receiver where the pin was removed. It is very important that these holes line up to keep from damaging the threads when the screws are installed. 

Install the two 6-32 screws through the holes where the pin was removed & into the S&K mount. LIGHTLY TIGHTEN THESE TWO SCREWS & DO NOT RETIGHTEN. Center the mount at the rear & install the 10-32 x ½” sets screws into the top of the mount & tighten.  You can adjust windage some by loosening the 10-32 set screws & moving the rear of the mount sideways & retighten. WHEN REMOVING THE MOUNT DO NOT TRY TO REMOVE THE TWO 6-32 SCREWS UNTIL LOOSENING THE SET SCREWS ON TOP OF THE MOUNT.



Related Categories That You May Also Be Interested In:
 Mauser Accessories |  Mauser Scope Mounts |  S&K Scope Mounts |  S&K Scope Mounts |