|
Called a stripper
clip because cartridges are stripped off a clip when a magazine
is loaded, stripper clips are a type of speedloader that holds
cartridges together for easier loading of a firearm's magazine.
Depending on the magazine, stripper clips come in a variety of
shapes and sizes with most being straight or crescent-shaped,
Instructions on how to properly use a stripper
clip.
Before you start -
Three basic items are needed to load a magazine with a stripper
clip. You will need the magazine you want loaded, a stripper clip
guide, and a loaded stripper clip.
1. First, you need to place the stripper clip guide on the top
rear of the magazine. This will be used as guide to load the cartridges
into the magazine.
2. Once the
guide is hooked onto the magazine, place a loaded stripper clip
into the clip guide.
3. Once secure,
now grip the mag tightly and push the cartridges into the magazine.
The cartridges should slide down the stripper clip and into the
magazine. The small retaining tab on the stripper clip should
bend and allow the cartridges to feed easily into the magazine.
4. Keep pushing
until all the cartridges hace fed into the magazine. Repeat the
procedures above with a set of new loaded stripper clips until
the magazine is loaded.
Galati International offers an assortment of stripper
clips, bandoleers,
repack
kits and other related items to help in the loading of stripper
clips.
|
