Wilson Combat Ambidextrous Thumb Safety - Stainless


Wilson+Combat+Ambidextrous+Thumb+Safety+-+Stainless

Processing...
Item #: WS192S

$60.95

In Stock for Immediate Shipping
Qty

Manufacturer MPN:
Wilson Combat 192S

UPC: 874218000448
Weight: 0.50 pounds


Product Description

1911 Tactical Ambidextrous Thumb Safety – Stainless

The Tactical Ambidextrous Thumb Safety will allow your 1911 Auto to be operated with either the right or left hand. This is an essential feature for left-handed shooters but has many other uses including combat competition. Both levers are extended and serrated with the left side being slightly wider than the right. Minor fitting required.

NOTE: Specifically Designed for Concealed Carry

Fits: A-O
Colt Government Model
Enhanced Model
Springfield Armory 1911 A1
Military 1911/1911 A1
Auto Ordnance 1911 A1
Norinco 1911 A1
Caspian 1911 A1
Wilson 1996 A2
Colt Commander
LW Commander
Combat Commander
1991 A1 Commander
Detonics ServiceMaster
Colt Officers Model
LW Officers Model
1991 A1 Compact
Officers Model Enhanced
Springfield Armory Compact 1911 A1
LW Compact
Compact Mil-Spec
Springfield Armory Champion 1911 A1
Champion Mil-Spec
Safari Arms MatchMaster
Safari Arms Enforcer
Detonics ScoreMaster
Detonics CombatMaster
Caspian Hi-Cap
Strayer-Tripp-Voigt 2011

Para-Ordnance P-12
Para-Ordnance P-13
Para-Ordnance P-14
Colt Gold Cup
AMT Hardballer

 

Installation Instructions for Ambidextrous Safeties #192

BE SURE THE PISTOL IS UNLOADED, FOLLOW THE INSTRUCTION EXACTLY AS NOTED BELOW

1. Remove grips, cock pistol, and remove thumb safety and frame plunger assembly from plunger tube. Ensure that your plunger tube is tight, flush, and properly riveted to your frame.

2. Push out mainspring housing pin and slide mainspring housing down approx. 1/4" to remove grip safety. Reinstall mainspring housing and pin.

3. With the hammer cocked reinsert the original thumb safety without the plunger assembly to understand how the safety lug blocks the movement of the sear when the trigger is pulled.

4. Compare your original safety lug to the new Wilson safety.

The Wilson safety lug is oversize in the fitting area to compensate for varying gun tolerances. Use a very fine cut file or stone to evenly remove material from the safety lug flat where is blocks the sear without allowing any sear movement when the trigger is pulled.

5. File or stone your hammer and sear pins flush with the right side of the frame so they do not interfere with the right-side safety.

6. Reassemble your safety plunger assembly and left side safety only to check the safety operation. You may need to polish the safety detent area to get smooth, crisp operation.

7. Assemble the right-side safety and engage the slotted shank with the left side shaft. Check for smooth operation. You may need to lightly polish contact areas for smooth operation. Check for alignment with the sides of the frame since the frame is often rounded in the rear from refinishing. You may also need to chamber the hold in the grip safety where the thumb safety shaft passes through to prevent binding.

8. Mark the right-side safety with lamp black where the grip gloves the tang. This will indicate where the safety tang rubs the grip and where inletting will be required. Many aftermarket grips are already cut for ambidextrous safeties.

9. To inlet the right grip panel remove just enough material to allow for smooth and snug safety operation. If you remove too much material the right-side safety can work loose and fail to function.

10. Reassemble an unloaded pistol and test the assembled safety for feel and safe function. Cock the pistol, push safety up in the safe position and pull trigger. The hammer should not fall and there should be no perceptible sear movement. If the hammer falls or sear moves, you have overcut the safety lug.

11. Test fire with live ammunition to ensure safe function.

WARNING: No liability is expressed or implied for damage which may result from improper installation.

If you are not familiar with mechanics of your pistol or the use of tools required for the modification, it is

RECOMMENDED THAT YOU HAVE INSTALLATION DONE BY A QUALIFIED GUNSMITH.


Related Categories That You May Also Be Interested In:
 1911 45 Auto Safeties and Accessories |  Wilson Combat |