1891 Argentine Mauser Scout Weaver Style Mount - S&K Scope Mounts


1891+Argentine+Mauser+Scout+Weaver+Style+Mount+-+S%26K+Scope+Mounts

Processing...
Item #: SKARG80

$72.95

Out of Stock
Place on back-order to ship when back in stock. We will only charge you when it ships out the door.

We do not double-charge shipping on back-orders. You only pay shipping once.
Qty

Manufacturer MPN:
S&K Mounts ARG80

UPC: none
Weight: 2.00 pounds


Product Description

No drilling, tapping or major alteration. Guaranteed to hold zero. Can be removed and reinstalled easily. Made in the USA of top grade military allan aircraft aluminum. Use Weaver type rings (not included). Allen wrench not included.  Will not fit Carbine or 1909.

Installation instructions for the ARGENTINE 1891

Push the pin out at the rear of the rear flip sight. Remove the flip up sight & the spring by sliding it forward and lifting it out. Slide the flange nut into the undercut at the front of the sight where the spring was with the full radius on the nut toward the rear. 

Place the mount over the special nut & align the 4-40 tapped holes in the mount up with the holes in the side of the receiver. It is very important that these holes line up to keep from damaging the threads when the screws are installed. Put in the (2) 4-40 x ⅜ socket head screws. Do not tighten!!!

Put the 10-32 x 3/8 flat head screw through the mount and into the nut & tighten. Lightly tighten the (2) 4-40 socket head screws. They DO NOT need to be real tight. Put the 10-32 x ⅜ set screw down through the tapped hole in the top of the mount and tighten against the receiver. The purpose of this set screw is to keep pressure on the 4-40 socket head screws so they can’t back out.


Related Categories That You May Also Be Interested In:
 Mauser Accessories |  Mauser Scope Mounts |  S&K Scope Mounts |  S&K Scope Mounts |